Print-Friendly Page

Overview: Introduction to Statistics

Statistical tests are commonly used in quantitative research. The purpose of this guide is to provide a brief introduction to statistics, with an emphasis on statistics used in the social sciences. To read about statistics, click on the items below:

Introduction to Statistics

Statistics is a set of tools used to organize and analyze data. Data must either be numeric in origin or transformed by researchers into numbers. For instance, statistics could be used to analyze percentage scores English students receive on a grammar test: the percentage scores ranging from 0 to 100 are already in numeric form. Statistics could also be used to analyze grades on an essay by assigning numeric values to the letter grades, e.g., A=4, B=3, C=2, D=1, and F=0.

Employing statistics serves two purposes, (1) description and (2) prediction. Statistics are used to describe the characteristics of groups. These characteristics are referred to as variables. Data is gathered and recorded for each variable. Descriptive statistics can then be used to reveal the distribution of the data in each variable.

Statistics is also frequently used for purposes of prediction. Prediction is based on the concept of generalizability: if enough data is compiled about a particular context (e.g., students studying writing in a specific set of classrooms), the patterns revealed through analysis of the data collected about that context can be generalized (or predicted to occur in) similar contexts. The prediction of what will happen in a similar context is probabilistic. That is, the researcher is not certain that the same things will happen in other contexts; instead, the researcher can only reasonably expect that the same things will happen.

Prediction is a method employed by individuals throughout daily life. For instance, if writing students begin class every day for the first half of the semester with a five-minute freewriting exercise, then they will likely come to class the first day of the second half of the semester prepared to again freewrite for the first five minutes of class. The students will have made a prediction about the class content based on their previous experiences in the class: Because they began all previous class sessions with freewriting, it would be probable that their next class session will begin the same way. Statistics is used to perform the same function; the difference is that precise probabilities are determined in terms of the percentage chance that an outcome will occur, complete with a range of error. Prediction is a primary goal of inferential statistics.

Descriptive and Inferential Statistics

Descriptive statistics are used to reveal patterns through the analysis of numeric data. Inferential statistics are used to draw conclusions and make predictions based on the analysis of numeric data.

Revealing Patterns Using Descriptive Statistics

Descriptive statistics, not surprisingly, "describe" data that have been collected. Commonly used descriptive statistics include frequency counts, ranges (high and low scores or values), means, modes, median scores, and standard deviations. Two concepts are essential to understanding descriptive statistics: variables and distributions. To read more about descriptive statistics, click on the items below:

Variables

Statistics are used to explore numerical data (Levin, 1991). Numerical data are observations which are recorded in the form of numbers (Runyon, 1976). Numbers are variable in nature, which means that quantities vary according to certain factors. For examples, when analyzing the grades on student essays, scores will vary for reasons such as the writing ability of the student, the students' knowledge of the subject, and so on. In statistics, these reasons are called variables. Variables are divided into three basic categories:

Nominal Variables

Nominal variables classify data into categories. This process involves labeling categories and then counting frequencies of occurrence (Runyon, 1991). A researcher might wish to compare essay grades between male and female students. Tabulations would be compiled using the categories "male" and "female." Sex would be a nominal variable. Note that the categories themselves are not quantified. Maleness or femaleness are not numerical in nature, rather the frequencies of each category results in data that is quantified -- 11 males and 9 females.

Ordinal Variables

Ordinal variables order (or rank) data in terms of degree. Ordinal variables do not establish the numeric difference between data points. They indicate only that one data point is ranked higher or lower than another (Runyon, 1991). For instance, a researcher might want to analyze the letter grades given on student essays. An A would be ranked higher than a B, and a B higher than a C. However, the difference between these data points, the precise distance between an A and a B, is not defined. Letter grades are an example of an ordinal variable.

Interval Variables

Interval variables score data. Thus the order of data is known as well as the precise numeric distance between data points (Runyon, 1991). A researcher might analyze the actual percentage scores of the essays, assuming that percentage scores are given by the instructor. A score of 98 (A) ranks higher than a score of 87 (B), which ranks higher than a score of 72 (C). Not only is the order of these three data points known, but so is the exact distance between them -- 11 percentage points between the first two, 15 percentage points between the second two and 26 percentage points between the first and last data points.

Distributions

A distribution is a graphic representation of data. The line formed by connecting data points is called a frequency distribution. This line may take many shapes. The single most important shape is that of the bell-shaped curve, which characterizes the distribution as "normal." A perfectly normal distribution is only a theoretical ideal. This ideal, however, is an essential ingredient in statistical decision-making (Levin, 1991). A perfectly normal distribution is a mathematical construct which carries with it certain mathematical properties helpful in describing the attributes of the distribution. Although frequency distribution based on actual data points seldom, if ever, completely matches a perfectly normal distribution, a frequency distribution often can approach such a normal curve.

The closer a frequency distribution resembles a normal curve, the more probable that the distribution maintains those same mathematical properties as the normal curve. This is an important factor in describing the characteristics of a frequency distribution. As a frequency distribution approaches a normal curve, generalizations about the data set from which the distribution was derived can be made with greater certainty. And it is this notion of generalizability upon which statistics is founded. It is important to remember that not all frequency distributions approach a normal curve. Some are skewed. When a frequency distribution is skewed, the characteristics inherent to a normal curve no longer apply.

Making Predictions Using Inferential Statistics

Inferential statistics are used to draw conclusions and make predictions based on the descriptions of data. In this section, we explore inferential statistics by using an extended example of experimental studies. Key concepts used in our discussion are probability, populations, and sampling. To read more about inferential statistics, click on the items below:

Experiments

A typical experimental study involves collecting data on the behaviors, attitudes, or actions of two or more groups and attempting to answer a research question (often called a hypothesis). Based on the analysis of the data, a researcher might then attempt to develop a causal model that can be populations.

A question that might be addressed through experimental research might be "Does grammar-based writing instruction produce better writers than process-based writing instruction?" Because it would be impossible and impractical to observe, interview, survey, etc. all first-year writing students and instructors in classes using one or the other of these instructional approaches, a researcher would study a sample – or a subset – of a population. Sampling – or the creation of this subset of a population – is used by many researchers who desire to make sense of some phenomenon.

To analyze differences in the ability of student writers who are taught in each type of classroom, the researcher would compare the writing performance of the two groups of students. Two key concepts used to conduct the comparison are:

Dependent Variables

In an experimental study, a variable whose score depends on (or is determined or caused by) another variable is called a dependent variable. For instance, an experiment might explore the extent to which the writing quality of final drafts of student papers is affected by the kind of instruction they received. In this case, the dependent variable would be writing quality of final drafts.

Independent Variables

In an experimental study, a variable that determines (or causes) the score of a dependent variable is called an independent variable. For instance, an experiment might explore the extent to which the writing quality of final drafts of student papers is affected by the kind of instruction they received. In this case, the independent variable would be the kind of instruction students received.

Probability

Beginning researchers most often use the word probability to express a subjective judgment about the likelihood, or degree of certainty, that a particular event will occur. People say such things as: "It will probably rain tomorrow." "It is unlikely that we will win the ball game." It is possible to assign a number to the event being predicted, a number between 0 and 1, which represents degree of confidence that the event will occur. For example, a student might say that the likelihood an instructor will give an exam next week is about 90 percent, or .9. Where 100 percent, or 1.00, represents certainty, .9 would mean the student is almost certain the instructor will give an exam. If the student assigned the number .6, the likelihood of an exam would be just slightly greater than the likelihood of no exam. A rating of 0 would indicate complete certainty that no exam would be given(Shoeninger, 1971).

The probability of a particular outcome or set of outcomes is called a p-value. In our discussion, a p-value will be symbolized by a p followed by parentheses enclosing a symbol of the outcome or set of outcomes. For example, p(X) should be read, "the probability of a given X score" (Shoeninger). Thus p(exam) should be read, "the probability an instructor will give an exam next week."

Population

A population is a group which is studied. In educational research, the population is usually a group of people. Researchers seldom are able to study every member of a population. Usually, they instead study a representative sample – or subset – of a population. Researchers then generalize their findings about the sample to the population as a whole.

Sampling

Sampling is performed so that a population under study can be reduced to a manageable size. This can be accomplished via random sampling, discussed below, or via matching.

Random sampling is a procedure used by researchers in which all samples of a particular size have an equal chance to be chosen for an observation, experiment, etc (Runyon and Haber, 1976). There is no predetermination as to which members are chosen for the sample. This type of sampling is done in order to minimize scientific biases and offers the greatest likelihood that a sample will indeed be representative of the larger population. The aim here is to make the sample as representative of the population as possible. Note that the closer a sample distribution approximates the population distribution, the more generalizable the results of the sample study are to the population. Notions of probability apply here. Random sampling provides the greatest probability that the distribution of scores in a sample will closely approximate the distribution of scores in the overall population.

Matching

Matching is a method used by researchers to gain accurate and precise results of a study so that they may be applicable to a larger population. After a population has been examined and a sample has been chosen, a researcher must then consider variables, or extrinsic factors, that might affect the study. Matching methods apply when researchers are aware of extrinsic variables before conducting a study. Two methods used to match groups are:

Although, in theory, matching tends to produce valid conclusions, a rather obvious difficulty arises in finding subjects which are compatible. Researchers may even believe that experimental and control groups are identical when, in fact, a number of variables have been overlooked. For these reasons, researchers tend to reject matching methods in favor of random sampling.

Precision Matching

In precision matching, there is an experimental group that is matched with a control group. Both groups, in essence, have the same characteristics. Thus, the proposed causal relationship/model being examined allows for the probabilistic assumption that the result is generalizable.

Frequency Distribution

Frequency distribution is more manageable and efficient than precision matching. Instead of one-to-one matching that must be administered in precision matching, frequency distribution allows the comparison of an experimental and control group through relevant variables. If three Communications majors and four English majors are chosen for the control group, then an equal proportion of three Communications major and four English majors should be allotted to the experiment group. Of course, beyond their majors, the characteristics of the matched sets of participants may in fact be vastly different.

Methods

Statistics can be used to analyze individual variables, relationships among variables, and differences between groups. In this section, we explore a range of statistical methods for conducting these analyses.

Statistics can be used to analyze individual variables, relationships among variables, and differences between groups. To read more about statistical methods, click on the items below:

Analyzing Individual Variables

The statistical procedures used to analyze a single variable describing a group (such as a population or representative sample) involve measures of central tendency and measures of variation. To explore these measures, a researcher first needs to consider the distribution, or range of values of a particular variable in a population or sample. Normal distribution occurs if the distribution of a population is completely normal. When graphed, this type of distribution will look like a bell curve; it is symmetrical and most of the scores cluster toward the middle. Skewed Distribution simply means the distribution of a population is not normal. The scores might cluster toward the right or the left side of the curve, for instance. Or there might be two or more clusters of scores, so that the distribution looks like a series of hills.

Once frequency distributions have been determined, researchers can calculate measures of central tendency and measures of variation. Measures of central tendency indicate averages of the distribution, and measures of variation indicate the spread, or range, of the distribution (Hinkle, Wiersma and Jurs 1988).

Measures of Central Tendency

Central tendency is measured in three ways: mean, median and mode. The mean is simply the average score of a distribution. The median is the center, or middle score within a distribution. The mode is the most frequent score within a distribution. In a normal distribution, the mean, median and mode are identical.

Measures of Variation

Student	# of Crayons
A	8
B	16
C	16
D	32
E	32
F	32
G	48
H	48
J	56

Measures of variation determine the range of the distribution, relative to the measures of central tendency. Where the measures of central tendency are specific data points, measures of variation are lengths between various points within the distribution. Variation is measured in terms of range, mean deviation, variance, and standard deviation (Hinkle, Wiersma and Jurs 1988).

The range is the distance between the lowest data point and the highest data point. Deviation scores are the distances between each data point and the mean.

Mean deviation is the average of the absolute values of the deviation scores; that is, mean deviation is the average distance between the mean and the data points. Closely related to the measure of mean deviation is the measure of variance.

Variance also indicates a relationship between the mean of a distribution and the data points; it is determined by averaging the sum of the squared deviations. Squaring the differences instead of taking the absolute values allows for greater flexibility in calculating further algebraic manipulations of the data. Another measure of variation is the standard deviation.

Standard deviation is the square root of the variance. This calculation is useful because it allows for the same flexibility as variance regarding further calculations and yet also expresses variation in the same units as the original measurements (Hinkle, Wiersma and Jurs 1988).

Analyzing Differences Between Groups

Statistical tests can be used to analyze differences in the scores of two or more groups. The following statistical tests are commonly used to analyze differences between groups:

T-Tests

A t-test is used to determine if the scores of two groups differ on a single variable. A t-test is designed to test for the differences in mean scores. For instance, you could use a t-test to determine whether writing ability differs among students in two classrooms.

Note: A t-test is appropriate only when looking at paired data. It is useful in analyzing scores of two groups of participants on a particular variable or in analyzing scores of a single group of participants on two variables.

Matched-Pairs T-Tests

This type of t-test could be used to determine if the scores of the same participants in a study differ under different conditions. For instance, this sort of t-test could be used to determine if people write better essays after taking a writing class than they did before taking the writing class.

Analysis of Variance

The ANOVA (analysis of variance) is a statistical test which makes a single, overall decision as to whether a significant difference is present among three or more sample means (Levin 484). An ANOVA is similar to a t-test. However, the ANOVA can also test multiple groups to see if they differ on one or more variables. The ANOVA can be used to test between-groups and within-groups differences. There are two types of ANOVAs:

One-Way ANOVA: This tests a group or groups to determine if there are differences on a single set of scores. For instance, a one-way ANOVA could determine whether freshmen, sophomores, juniors, and seniors differed in their reading ability.

Multiple ANOVA (MANOVA): This tests a group or groups to determine if there are differences on two or more variables. For instance, a MANOVA could determine whether freshmen, sophomores, juniors, and seniors differed in reading ability and whether those differences were reflected by gender. In this case, a researcher could determine (1) whether reading ability differed across class levels, (2) whether reading ability differed across gender, and (3) whether there was an interaction between class level and gender.

Analyzing Relationships Among Variables

Statistical relationships between variables rely on notions of correlation and regression. These two concepts aim to describe the ways in which variables relate to one another:

Correlation

Correlation tests are used to determine how strongly the scores of two variables are associated – or correlated – with each other. A researcher might want to know, for instance, whether a correlation exists between students' writing placement examination scores and their scores on a standardized test such as the ACT or SAT. Correlation is measured using values between +1.0 and -1.0. Correlations close to 0 indicate little or no relationship between two variables, while correlations close to +1.0 (or -1.0) indicate strong positive (or negative) relationships (Hayes et al. 554).

Correlation denotes positive or negative association between variables in a study. Two variables are positively associated when larger values of one tend to be accompanied by larger values of the other. The variables are negatively associated when larger values of one tend to be accompanied by smaller values of the other (Moore 208).

An example of a strong positive correlation would be the correlation between age and job experience. Typically, the longer people are alive, the more job experience they might have.

An example of a strong negative relationship might occur between the strength of people's party affiliations and their willingness to vote for a candidate from different parties. In many elections, Democrats are unlikely to vote for Republicans, and vice versa.

Regression

Regression analysis attempts to determine the best "fit" between two or more variables. The independent variable in a regression analysis is a continuous variable, and thus allows you to determine how one or more independent variables predict the values of a dependent variable.

Simple Linear Regression is the simplest form of regression. Like a correlation, it determines the extent to which one independent variables predicts a dependent variable. You can think of a simple linear regression as a correlation line. Regression analysis provides you with more information than correlation does, however. It tells you how well the line "fits" the data. That is, it tells you how closely the line comes to all of your data points. The line in the figure indicates the regression line drawn to find the best fit among a set of data points. Each dot represents a person and the axes indicate the amount of job experience and the age of that person. The dotted lines indicate the distance from the regression line. A smaller total distance indicates a better fit. Some of the information provided in a regression analysis, as a result, indicates the slope of the regression line, the R value (or correlation), and the strength of the fit (an indication of the extent to which the line can account for variations among the data points).

Multiple Linear Regression allows one to determine how well multiple independent variables predict the value of a dependent variable. A researcher might examine, for instance, how well age and experience predict a person's salary. The interesting thing here is that one would no longer be dealing with a regression "line." Instead, since the study deals with three dimensions (age, experience, and salary), it would be dealing with a plane, that is, with a two-dimensional figure. If a fourth variable was added to the equations, one would be dealing with a three-dimensional figure, and so on.

Misuses of Statistics

Statistics consists of tests used to analyze data. These tests provide an analytic framework within which researchers can pursue their research questions. This framework provides one way of working with observable information. Like other analytic frameworks, statistical tests can be misused, resulting in potential misinterpretation and misrepresentation. Researchers decide which research questions to ask, which groups to study, how those groups should be divided, which variables to focus upon, and how best to categorize and measure such variables. The point is that researchers retain the ability to manipulate any study even as they decide what to study and how to study it.

Introduction to Statistics

Annotated Bibliography

Stockberger, D. W. (1996). Introductory statistics: Concepts, models and applications. Available: http://www.psychstat.smsu.edu/ [1997, December 8].

Writing Guides

Print-Friendly Page

Overview: Introduction to Statistics

Introduction to Statistics

Descriptive and Inferential Statistics

Revealing Patterns Using Descriptive Statistics

Variables

Nominal Variables

Ordinal Variables

Interval Variables

Distributions

Making Predictions Using Inferential Statistics

Experiments

Dependent Variables

Independent Variables

Probability

Population

Sampling

Matching

Precision Matching

Frequency Distribution

Methods

Analyzing Individual Variables

Measures of Central Tendency

Measures of Variation

Analyzing Differences Between Groups

T-Tests

Matched-Pairs T-Tests

Analysis of Variance

Analyzing Relationships Among Variables

Correlation

Regression

Misuses of Statistics

Introduction to Statistics

Annotated Bibliography